 |
Included:
(1) Shelf Sitter Countdown Board & Base
(1) Event piece
(1) Decoration Piece
(2) Sets of numbers 1-9 and one 0
Details:
- Design printed directly on the wood
- Portions of this piece are 3-dimensional
- The event and decoration pieces can be interchanged with others available in the shop
- Pieces hang on the pegs included on the board
- Additional pieces sold separately
Please remember that colors may vary from monitor to monitor. This product is not sealed and is therefore not designed to be used outdoors or in very humid environments. Some char marks are to be expected, especially on the back side of this piece. These may be wiped off with a damp cloth or lightly sanded if desired.
- All stickers purchased, unless otherwise specified, are printed on a permanent, semi-gloss sticker paper. This sticker paper is thinner than traditional sticker papers and has a semi-gloss finish which allows for beautiful vibrance. These stickers can be placed on paper and will not be able to be removed easily*. The best marker to write with on these stickers is a Sharpie permanent marker, though some other pens may also work. Please note that felt tip pens/markers will not work on these stickers.
*If pulled carefully, the sticker may be able to be repositioned immediately following placing it on paper, but will become permanent with pressure and time. Krissyanne Designs does not recommend attempting to remove stickers without the use of an adhesive remover.
All Krissyanne Designs sticker sheets are printed the same size to allow for uniformity in storage. Sticker sheet size is 5" W x 8" H. All stickers are cut on the sheet to allow for effective removal from the backing. Due to the type of sticker paper used, stickers may seem slightly more difficult to remove from the sheet than you may be used to. Do not be afraid to bend the sheet to remove the stickers.
Note: No stickers printed by Krissyanne Designs are weatherproof, but ink should not bleed if they come in contact with slight moisture. It is not recommended to leave your stickers in a hot or humid area for an extended period of time as this could affect the adhesive on the back.
|
|
|
Wonderful! 
